EZ Connect™Wireless USB AdapterUser GuideSMC2662W-ARV 1.0
EnglishEnglishCreate with PassphraseSecurity keys for WEP encryption are generatedfrom your Passphrase string, so you must use thesame passphrase on a
EnglishEnglishNETWORK CONFIGURATION AND PLANNINGSMC’s EZ Connect Wireless Solution supports a stand-alone wirelessnetwork configuration, as well as an
EnglishEnglishSetting the Communication DomainStationary Wireless PCsThe Basic Service Set (BSS) is the communication domain for eachSMC2652W access p
NETWORK CONNECTION PROBLEMSIf the LED’s on the USB adapter are not lit, or if you can’t accessany network resources from the computer. Check the follo
COMPLIANCESFCC Class B CertificationThis device complies with Part 15 of the FCC Rules. Operation issubject to the following conditions:1. This device
SPECIFICATIONSFunctional CriteriaData Rate 1, 2, 5.5, 11 MbpsTransmission Mode Half duplexNetwork Connection IEEE 802.11b wirelessOperating Range
CopyrightInformation furnished by SMC Networks, Inc. (SMC) is believed tobe accurate and reliable. However, no responsibility is assumed bySMC for its
EZ Connect Wireless USB adapter ManualThe 11 Mbps wireless USB adapter is an easy to use, cost-effective,high-speed and secure wireless networking dev
DRIVER INSTALLATIONSelect the driver you need for your system and refer to this guidefor the installation and configuration procedure. Any new orupdat
EnglishEnglish4. Set the "Channel" to the same radio channel as that usedby the other wireless clients in your group. However, if youare co
8. Set the "RTS Threshold" to the same as that used by otherdevices in your network. (The default is 2347 which means"Disabled")9
12. Select the "Configuration" tab and click "Add" to install thenetwork protocols you want to use, such as IPX/SPX,NetBEUI or TCP
EnglishEnglish4. Finish the driver installation.5. If you want to add more protocols after installation, go tocontrol panel and double click on "
EnglishEnglishQuick-Launch IconAfter the utility program is running, it will have a "Quick Launch"icon in the lower right hand corner of the
EnglishEnglishPS Mode Enable the Power Saving Mode for reducing powerloading. (Default: Disabled)Note : The "Channel" can only be set when
Comments to this Manuals