SMC Networks SMC9452TX-1 User Manual

9 PCI Configuration In most cases, your network card is automatically configured when you power-up your computer. In certain computers, however, yo

10Driver Installation Windows 95/98 NOTE: Installation processes will require the use of your original, licensed copy of Windows. Please have your W

11Step 3: Clear all checkboxes except for [Specify a location:]. Then press the [Browse] button and look for the drivers on your CD-ROM. If using Win

12Step 5: Once the system has copied the SMC drivers from the CD, it may then request files from your original Windows disk. Please insert the Window

13Step 7: Once all the necessary files are copied from the Windows CD, the driver install process will be complete. Click [Finish] to exit the wizard

14Windows Me NOTE: Installation processes will require the use of your original, licensed copy of Windows. Please have your Windows CD available BEFO

15Step 3: The system should find the drivers. Click the [Next >] button to continue the installation. (Note: If the system could not find the driv

16Windows NT Step 1: NT is not a Plug-and-Play Operating System, thus you need to manually install the drivers. Right-click on the [Network] icon on

17Windows 2000 Step 1: After you have inserted the SMC9452TX-1 PCI Card in your machine and turned it back on, the Operating System will automaticall

18Windows XP Step 1: After you have inserted the SMC9452TX-1 PCI Card in your machine and turned it back on, the Operating System will automatically

1Copyrights Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC f

19

20Step 3: Go to the [Driver] tab and click [Update Driver]. Select the [Install from a list...] option and click [Next >]. Select the [Don't

21

22Click [Have Disk] and browse to the location of the drivers on the CD. This should be ?:\SMC9452\WINXP. (Note: The ? equals the letter of your CD-R

23Step 4: The correct model of your SMC adapter will now be displayed. Click [Next >]. This process will be completed once the drivers are copied

24 Driver Verification Windows 95/98/Me Step 1: Right-click the My Computer icon on your desktop and click [Properties]. Step 2: Then go to the

25Windows 2000 Step 1: Right-click the My Computer icon on your desktop and click [Properties]. Step 2: Then go to the Hardware tab and click [Devi

26Step 2: Then go to the Hardware tab and click [Device Manager]. Open the [Network adapters] section. You should see your SMC EZ Card 1000 card in t

27TROUBLESHOOTING PCI Compatibility Early PCI BIOS versions do not properly support the PCI specification and may “hang” when a network card drive

28Solutions for Common Problems Problems are often caused by cabling errors, conflicts with other devices installed in the same computer, or softwar

2Contents Warranty …………………………………………………….…..………..…... 3 Compliances ……………………………..……………………………………. 5 Hardware Description ...

29Cable Specifications Cable Types and Specifications Cable Type Max. Length Connector 10BASE-T Cat. 3, 4, 5 100-ohm UTP100 m (328 ft) RJ-45 10

30Caution: Each wire pair must be attached to the RJ-45 connectors in a specific orientation. TECHNICAL SPECIFICATIONS Bus Interface IBM com

31 Temperature Operating 0 to 55 °C (32 to 131 °F) Storage -20 to 65 °C (-4 to 150 °F) Humidity 10% to 90% (non-condensing) Standards IEEE 802.3 10

32TERMINOLOGY 10BASE-T: IEEE 802.3 specifications for 10 Mbps Ethernet over two pairs of Category 3, 4, or 5 UTP cable. 100BASE-TX: IEEE 802.3u sp

33Fast Ethernet: A 100 Mbps network communication system based on Ethernet and the CSMA/CD access method. Full Duplex: Transmission method that allo

34MDI / MDI-X: Medium Dependent Interface - Also called an "uplink port," it is a port on a network hub or switch used to connect to other

FOR TECHNICAL SUPPORT, CALL:From U.S.A. and Canada (24 hours a day, 7 days a week)(800) SMC-4-YOU; Phn: (949) 679-8000; Fax: (949) 679-1481From Europe

3Limited Warranty Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials,

4Limited Warranty WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT

5Compliances FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

6• Immunity to conducted disturbances, Induced by radio-frequency fields: EN61000-4-6:1996 (0.15 - 80 MHz with 1 kHz AM 80% Modulation: 3 V/m) • Po

7Hardware Description SMC’s EZ Card 1000, SMC9452TX-1, is a Gigabit Ethernet network interface card for 32-bit PCI local bus-compliant computers. It

8System Requirements Before you install the EZ Card 1000, check your system for the following requirements: • A PC and BIOS that support the PCI L