SMC Networks SMC2209USB/ETH User Manual

6 | Driver Verification Windows 98/Me/2000/XP Section 6.1 | Windows 98/Me Step 1: Right-click the My Computer icon on your desktop and click

7 | Troubleshooting • You cannot connect to the network o You did not install the software driver properly. Please see Section 6 to verify this. I

8 | Cable Types and Specifications Cable Types and Specifications Cable Type Max. Length Connector 10Base-T Cat. 3, 4, 5 100-ohm UTP 100 m (328ft

9 | Technical Specifications Standards: IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x 100Base-TX Flow Control support Host Interface: USB

10 | Terminology 10BaseT - Physical Layer Specification for Twisted-Pair Ethernet using Unshielded Twisted Pair wire at 10Mbps. This is the most popul

Ethernet - A standard for computer networks. Ethernet networks are connected by special cables and hubs, and move data around at up to 10 million bits

the other device. There are typically one or two ports on a device that can be toggled between MDI (not crossed) and MDI-X (crossed). Medium Dependent

Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for

Compliances FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

1 | Hardware Description The SMC2209USB/ETH Compact USB 2.0 to 10/100 Mbps Ethernet Adapter is equipped with: • 1 RJ-45 connector for 10/100 Mbps co

2 | Package Contents After unpacking the SMC2209USB/ETH, check the contents of the box to be sure you have received the following components: • 1 S

4 | Driver Installation – Option 1 (Recommended) Windows 98/Me/2000/XP NOTE: Installation processes will require the use of your original, lice

5 | Driver Installation – Option 2 Windows 98/Me/2000/XP Section 5.1 | Windows 98 NOTE: Installation processes will require the use of your ori

Step 8: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the SMC2209USB/ETH will be initialized and ready for use. Section

Section 5.3 | Windows 2000/XP Step 1: After you have inserted the SMC2209USB/ETH in your machine and turned it back on, the Operating System will aut