SMC Networks SMC8024L2 User Manual download pdf (Page 43)

4-1

HAPTER

AKING

ETWORK

ONNECTIONS

Connecting Network Devices

The TigerSwitch 10/100/1000 units are designed to interconnect multiple

segments (or collision domains). It can be connected to network cards in

PCs and servers, as well as to hubs, switches or routers. It may also be

connected to devices using optional SFP transceivers.

Twisted-Pair Devices

Each device requires an unshielded twisted-pair (UTP) cable with RJ-45

connectors at both ends. Use Category 5, 5e or 6 cable for 1000BASE-T

connections, Category 5 or better for 100BASE-TX connections, and

Category 3 or better for 10BASE-T connections.

Cabling Guidelines

The RJ-45 ports on the switch support automatic MDI/MDI-X pinout

configuration, so you can use standard straight-through twisted-pair cables

to connect to any other network device (PCs, servers, switches, routers, or

hubs).

See Appendix B “Cables” for further information on cabling.

Caution: Do not plug a phone jack connector into an RJ-45

port. This will damage the switch. Use only twisted-pair cables

with RJ-45 connectors that conform to FCC standards.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 79 80

No comments

SMC Networks SMC8024L2 User Manual Page 43