SMC Networks TigerSwitch 100 User Manual download pdf (Page 138)

ONFIGURING

THE

WITCH

2-108

Web – Click IGMP, IGMP Member Port Table. Specify the interface

attached to a multicast service (via an IGMP-enabled switch or multicast

router), indicate the VLAN that will propagate the multicast service,

specify the multicast IP address, and then click Add. After you have

completed adding ports to the member list, click Apply.

CLI – This example assigns a multicast address to VLAN 1, and then

displays all the known multicast services supported on VLAN 1.

Showing Device Statistics

You can display standard statistics on network traffic from the Interfaces

Group and Ethernet-like MIBs, as well as a detailed breakdown of traffic

based on the RMOM MIB. Interfaces and Ethernet-like statistics display

errors on the traffic passing through each port. This information can be

used to identify potential problems with the switch (such as a faulty port or

Console(config)#ip igmp snooping vlan 1 static 224.0.0.12

ethernet 1/12 3-140

Console(config)#exit

Console#show mac-address-table multicast vlan 1 3-142

VLAN M'cast IP addr. Member ports Type

---- --------------- ------------ -------

1 224.0.0.12 Eth1/12 USER

1 224.1.2.3 Eth1/12 IGMP

Console#

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 333 334

No comments

SMC Networks TigerSwitch 100 User Manual Page 138