SMC Networks TigerSwitch 100 User Manual Page 17
- Page / 334
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
C
ONNECTING
TO
THE
S
WITCH
1-3
Required Connections
The switch provides an RS-232 serial port that enables a connection to a
PC or terminal for monitoring and configuring the switch. A null-modem
console cable is provided with the switch.
Attach a VT100-compatible terminal, or a PC running a terminal
emulation program to the switch. You can use the console cable provided
with this package, or use a null-modem cable that complies with the wiring
assignments shown in Appendix C.
To connect a terminal to the console port, complete the following steps:
1. Connect the console cable to the serial port on a terminal, or a PC
running terminal emulation software, and tighten the captive retaining
screws on the DB-9 connector.
2. Connect the other end of the cable to the RS-232 serial port on the
switch.
3. Make sure the terminal emulation software is set as follows:
• Select the appropriate serial port (COM port 1 or COM port 2).
• Set the data rate to 9600 baud.
• Set the data format to 8 data bits, 1 stop bit, and no parity.
• Set flow control to none.
• Set the emulation mode to VT100.
• When using HyperTerminal, select Terminal keys, not Windows
keys.
Note: When using HyperTerminal with Microsoft
®
Windows
®
2000,
make sure that you have Windows 2000 Service Pack 2 or later
installed. Windows 2000 Service Pack 2 fixes the problem of arrow
keys not functioning in HyperTerminal’s VT100 emulation. See
www.microsoft.com for information on Windows 2000 service
packs.
- TigerSwitch 10/100/1000 1
- Management Guide 3
- ANAGEMENT 15
- ONNECTING 17
- Remote Connections 18
- Basic Configuration 19
- Setting an IP Address 20
- Saving Configuration Settings 25
- Managing System Files 26
- System Defaults 27
- Home Page 32
- AVIGATING 33
- Panel Display 34
- Main Menu 35
- Setting the IP Address 40
- Manual Configuration 42
- Using DHCP/BOOTP 42
- Security 43
- CLI Commands 49
- Managing Firmware 52
- ISPLAYING 59
- APABILITIES 59
- Versions 60
- Port Configuration 62
- Configuring Port Mirroring 68
- Configuring Port Security 69
- Port Security Action 70
- Port Security Configuration 70
- Address Table Settings 71
- Displaying the Address Table 72
- Changing the Aging Time 74
- STP Information 76
- Tree information 78
- STP Configuration 80
- VLAN Configuration 91
- Assigning Ports to VLANs 92
- Displaying Current VLANs 96
- Creating VLANs 98
- Command Attributes 100
- ONFIGURATION 101
- Command Usage 104
- ONFIGURING 106
- Priority Level Traffic Type 113
- 7 Network Control 113
- 6 Internetwork Control 113
- 5Critical 113
- Status menu 115
- Mapping DSCP Priority 116
- 38, 40, 42 5 117
- IP DSCP Value CoS Value 117
- Port Trunk Configuration 118
- Configuring SNMP 124
- Access Mode 125
- Specifying Trap Managers 126
- SNMP IP Filtering 127
- Multicast Configuration 129
- Configuring IGMP Parameters 130
- ULTICAST 133
- Command Attribute 135
- Showing Device Statistics 138
- Statistical Values 139
- TATISTICS 141
- NTERFACE 145
- Telnet Connection 146
- Entering Commands 147
- Showing Commands 149
- Exec Commands 151
- Configuration Commands 152
- Command Line Processing 153
- Command Groups 154
- General Commands 156
- Console#enable 157
- Console# 157
- Flash/File Commands 162
- Console#delete test2.cfg 165
- System Management Commands 169
- Web Browser Operating System 177
- Console(config)# 177
- Command Mode 189
- Privileged Exec 189
- Example 189
- Authentication Commands 194
- UTHENTICATION 195
- SNMP Commands 202
- IP Commands 211
- Line Commands 217
- Console(config)#line console 219
- Console(config-line)# 219
- Interface Commands 228
- Default Setting 233
- Address Table Commands 244
- Spanning Tree Commands 249
- Console(config-if)# 259
- VLAN Commands 265
- XTENSION 277
- IGMP Snooping Commands 282
- Priority Commands 294
- Console(config)#map ip dscp 303
- Mirror Port Commands 307
- Port Trunking Commands 310
- ROUBLESHOOTING 315
- Select> 318
- Baudrate set to 115200 318
- SSIGNMENTS 321
- Glossary-1 323
- Glossary-2 324
- Glossary-3 325
- Glossary-4 326
- Glossary-5 327
- Glossary-6 328
- Glossary-7 329
- Glossary-8 330
Related products and manuals for Network switches SMC Networks TigerSwitch 100
(68 pages)
(64 pages)© 2020, manymanuals.com. All rights reserved. | 0.150 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals