SMC Networks TigerSwitch 100 User Manual download pdf (Page 217)

100

101

INE

OMMANDS

3-73

Example

Related Commands

interface (3-85)

Line Commands

You can access the onboard configuration program by attaching a VT100

compatible device to the server’s serial port. These commands are used to

set communication parameters for the serial port or a virtual terminal.

Note that Telnet is considered a virtual terminal connection, and the only

commands that apply to Telnet include exec-timeout and

password-thresh.

Console#ping 10.1.0.9

Type ESC to abort.

PING to 10.1.0.9, by 5 32-byte payload ICMP packets, timeout is 5

seconds

response time: 10 ms

response time: 0 ms

Ping statistics for 10.1.0.9:

5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)

Approximate round trip times:

Minimum = 0 ms, Maximum = 10 ms, Average = 8 ms

Console#

Command Function Mode Page

line Identifies a specific line for configuration and

starts the line configuration mode

GC 3-74

password Specifies a password on a line LC 3-76

exec-timeout Sets the interval that the command interpreter

waits until user input is detected

LC 3-77

password-thresh Sets the password intrusion threshold, which

limits the number of failed logon attempts

LC 3-78

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 333 334

Comments to this Manuals

No comments

SMC Networks TigerSwitch 100 User Manual Page 217

Comments to this Manuals

Related products and manuals for Network switches SMC Networks TigerSwitch 100